Citroën C6 suspension height programming
Send me a quid if this was useful?
What you need:
Rx for 1⩽x⩽4: measure the distance from the ground to the centre of the wheel (four measurements);
HxM for 1⩽x⩽4: measure the distance from the ground to the measurement site (four measurements);
Diagbox; and
low expectations.
Some related threads on
c6owners.org
:
Advice on diagnosing an on-going "Suspension Faulty"
,
Wonky suspension
Front left
R1 (theoretical 339 for 245/45 R18)
H1M (floor to measurement site)
K1M (calculated value for programming; expected 160)
Current value from Diagbox
Sensor value in Diagbox
Alternative value for programming
Front right
R2 (theoretical 339 for 245/45 R18)
H2M (floor to measurement site)
K2M (calculated value for programming; expected 160)
Current value in Diagbox
Sensor value
Alternative value for programming
Rear left
R3 (theoretical 339 for 245/45 R18)
H3M (floor to measurement site)
K3M (calculated value for programming; expected 111)
Current value in Diagbox
Sensor value
Alternative value for programming
Rear right
R4 (theoretical 339 for 245/45 R18)
H4M (floor to measurement site)
K4M (calculated value for programming; expected 111)
Current value in Diagbox
Sensor value
Alternative value for programming